Grading

Yard Grading Stratton

Yard grading stops property damage that may be caused by water. Water should be draining away from the property. This saves extra costs to be incurred when doing repairs after such damages. Yard grading is the best for setting up construction or even making improvements to existing ones.

Hiring an expert with knowledge and experience is recommended especially if you are new to yard grading. Illustrated below are guides and steps to help you understand more about yard grading and how to implement it;

1.Plan Your Yard Grading 

Identify the area you want to land grade. Do comprehensive underground research because there may be electric cables, internet cables, and water pipes passing at the intended site. Those are some of the potential challenges and should be dealt with first.

2.Use The Appropriate  Land Grading Soil

Experts prefer high clay content dirt to be used when yard grading. Compared to other types of soils, clay is less porous, so water will not be running through it. It is also heavy meaning it does not erode easily. Big particles of soil and humus should be separated before spreading the dirt.

3.Choose the Right Materials and Tools for Land Grading

For small projects, you require a pair of gloves, a rake, a shovel, and a wheelbarrow. In the case of big projects, hire an excavator is necessary to provide more power.

4.Identify the terrain of the area

To know the terrain of your yard area run a tight string with a level on it starting from the lowest to the highest point. Then take all the measurements and do the marking. Water will start draining from the high points ending to the low points. Add some soil along the edge of the lowest points to reduce the speed of running water thus preventing washing away of the topsoil used for yard grading.

5.Compact Down the Dirt

If your land grading area is not very large, use a sheet of metal or plywood for this task. Place the sheet over the dirt and run a heavy material over it. This is done after pulling the dirt gradually from the high points to the lower points away from the structure. In case your area of work is large, hire a compressor to do the compacting.

Compacting the dirt does not only make the yard neat but it prevents dirt from blown away by wind and being eroded by water.

6.Plant the Required Grass

First, remove any old grass from the yard that is being renovated. Select the type of grass seeds you require depending on the of your area. Plant the grass carefully making sure that you do not dig much soil from the ground. Try and maintain ground level as much as possible. Use compound fertilizers like NPK at the planting time.

Keep the area watered always as the grass germinates. Spread hay on top of the grass seeds to maintain moisture.

Conclusion.

At Stratton Landscaping, we will serve you with diligence when it comes to yard grading. We have experienced and tested experts. For free estimates, call us today!

 

Gravel Services Midlothian and Bon Air

 

Gravel installation can be a great surface to use because it’s cost-effective and an easy option to use for transformation. Before installation of gravel, you have to consider the size of the gravel, the surface below the gravel, and the role you want the gravel to have. Since gravel is not easy to clean, it’s important to consider the preparation needed. The considerations will ensure the gravel looks at its best once everything is finished.

Marking the section for gravel installation before you start is important because it will help the layout look neat and precise. This will help allow the right width while excavating the topsoil and the pushes if there are curves where you are installing the gravel. Marking will also save a lot of awkward alterations afterwards.

 It’s also important to consider the gravel purpose before purchasing it. If your gravel is for decorative purposes,  you have a wider option on which gravel to use because decorative gravel is not disturbed very often. You should choose medium-sized gravel for footpaths because too fine gravel would be moved easily as you walk, while too large gravel would make walking difficult. 

Here are the steps involved in gravel installation. Let’s jump straight in.

  1. Excavation before Gravel Installation

Gravel installation requires excavation and it’s rare to not excavate. The topsoil should be removed because its load-bearing ability is poor. The topsoil also has a heavy concentration of organic materials that makes it prone to retaining water. After remaining with an exposed layer of firm subsoil, fill with sub-base material and compact before laying the membrane.

  • Geotextile Membrane.

The geotextile membrane should be placed between the excavated ground and the base. The membrane ensures the sub-base material does not mix with the ground below and avoids the passage of water.  The geotextile membrane is essential where grounds are poor.

  • Laying the Sub-Base.

The sub-base provides the load-bearing ability because it helps to spread the weight of traffic., and also creates a solid layer resistant to rutting and channelization. The common sub-base material consists of crushed rock graded to dust. The ranging size ensures the material interlocks when compacted and still remains permeable to water.

  • Gravel Installation 

The gravel’s purpose is to provide a decorative finish. The gravel should not be deep because it has no benefit to the performance of the finished surface. The maximum depth of the gravel should be applied to provide good coverage of the sub-base and also prevent rutting.

The gravel should be laid directly on top of the sub-base and levelled with rakes and shovels. 

 

Conclusion.

Gravel installation is one of the most cost-effective additions you can make to your property and they also add beauty. At Stratton landscaping, our work ethic has led to many happy customers who return repeatedly for our services. We also pride ourselves on being on time so that we don’t intrude on your daily life. Our experienced team can install new gravel on your property or regrade your existing one. Contact us to schedule your gravel installation today!.

Gravel Services Midlothian and Bon Air

Why land Grading is Important before Gravel Installation

Land grading is to level a surface to create an excellent smooth surface to serve as the gravel installation foundation. Since each piece of land is different, e.g., in natural grading and soil makeup, grading may require dirt from higher up to be moved into lower-lying areas or moving in more soil from somewhere else. Each land has its unique way of grading it to complete gravel installation.

There are several benefits of surface grading before gravel installation, which include;

Improves Drainage

Ground runoffs account for much of the surface drainage. Therefore it’s essential to inspect water flows to ensure that nothing impedes the flow of water. Gravel installers often create these routes during land grading before gravel installation. The gravel installer may make a gentle slope that drains the water to a given course or ditches.

Land grading gives you a nice smooth surface.

Grading reshapes the earth and soil to make it more stable and smooth. The Land graders move the dirt from a higher section of the land to a lower region. The professionals will smooth out the ground and then install the gravel to stabilize the soil. They are smoothening the floor to result in a newly leveled surface that is easier and safer to use.

Surface Grading Enhances Transportation

Grading the surface gives you a smooth, uniform surface compacted before gravel installation. Ground Compaction ensures that the ground can handle heavy loads, vehicles, and heavy weather without breaking up.

Land Grading Improves landscape.

Grading the land before gravel installation involves removing dirt, leveling slopes, filling low spots, filling a hole, or hauling out to drop a hill. Sometimes it’s to re-grade an existing land that is not draining correctly or to create a slope. All this leads to improvement of the landscape before gravel installation.

Increase Usable Space

Slopes make parts of a landscape virtually unusable. Uneven land limits your options when you want to install gravel since it requires a flat surface. Grading eliminates hills and slopes, which prevent outdoor construction projects. Therefore when graders level the ground, there is more space for gravel installation.

Land Grading Provides a Strong Base.

Grading provides a strong foundation for gravel installation. Gravel installers limit the number of structural issues that can occur down the line while installing the gravel through compacting the ground. The control of the risk of erosion and damage to the rocks over a long time is through effective grading.

Conclusion

Quality surface grading in gravel installation stands the test of time, and laying a strong foundation through land grading is a vital part of that. If you are looking for help to get the fundamental right at Strattonlandscaping, we deliver a distinct quality grading level for gravel installation. Thus we ensure we exceed expectations. Your complete satisfaction is our priority when providing you with gravel installation. We will provide you with the best gravel installation services. Contact us today.

Gravel Services Midlothian and Bon Air

Five Tips for Light Grading Before Installation of Gravel Driveways

Before installing gravel, check the ground to determine if light grading of the property is professionally done. Note that if you do gravel installation on the ground that is uneven, drainage will become a major issue. In this post, we cover light grading tips to help you when preparing for gravel installation.

  1. Perform Light Grading Early

Ground preparations should be done in advance to ensure settling of soil occurs before the installation of gravel. If the light grading process is rushed, you risk installing gravel on soil that is not settled adequately. Therefore, perform light grading early to provide a considerable amount of time for the ground to settle appropriately.

  1. During Light Grading Ensure Proper Drainage

The ground should have a gentle slope that drains the water through a given route. Therefore, if the drainage routes are blocked, then expect to flood the gravel driveways. Note that ground runoff accounts for much of the surface drainage even when you install other types of in-ground drainage systems.

If the natural drainage is not sufficient, consider the installation of artificial drainage solutions. You may consider the installation of simple ditches dug several meters apart with a depth of around 90 centimeters. Alternatively, you may consider French ditches, to be constructed by filling a ditch using coarse gravel and topped up using permeable membranes or turf.

  1. Planning and Getting Rid of Potential Problems

Before you begin preparations, it is advisable that you make sure all pipes and cables buried just below the surface are removed. Therefore, do complete research before you begin excavation works. In the case of basement windows, ensure you create window wells so that you provide adequate lighting to the basement.

  1. Research the High and Low Points before Light grading

Before light grading has started, we advise that you research appropriately to determine the high and low points of the surface where gravel installation is to be carried out. Mark the high and low points before the exercise starts. Basically, you want to make sure the low points keep the water moving.

  1. Talk To An Expert

Do It Yourself practices may not give you the results you are expecting. An experienced professional shall ensure the recommended tools are used for the task. Besides, an expert will make sure no stone is left unturned. Eventually, you save a huge amount of money that would have been spent on regular repairs.

Conclusion

Are you planning to install gravel driveways at your home or commercial space? Talk to Stratton Landscaping and Tree Removal for professional yard preparation and installation of gravel driveways. We are the leading gravel driveway installers in Virginia. Contact us today for all your landscaping requirements.

Gravel Services

Gravel driveways enhance the appearance of your homestead. Besides,  it’s easy to maintain a gravel driveway compared to other types of driveways. If laid correctly gravel is a good quality product and your space can last for years.

Clearing all the vegetation on the space

Clearing vegetation ensures you do not experience the growth of weeds on your new driveway. However, you may choose to leave the plants that you feel shall enhance the appearance of your gravel driveway. Remember when it comes to gravel driveway maintenance, you should weed regularly to keep the ground looking as fresh as after the installation.  Regular maintenance enhances the appearance of your gravel driveway. This will ensure that the plants you want to reintroduce will grow effectively.

Break down lumps and bumps

Proper raking ensures an even surface, which is critical for your gravel driveway. Essentially, raking ensures that you don’t have areas that are higher than others.

Add compost manure or granulated fertilizer to boost fertility

incase you plan to have some vegetation around the driveway, it is important you ensure the ground where the crops shall be grown is fertile. Therefore, add some compost manure and fertilizer to that ground. Further, adding compost manure helps to loosen the soil and increase the production of soil carbon which is a source of energy for nutrients for plants. They reduce runoff and leaching in the soil.

Add a course to enhance drainage

Flooded rainwater can be a serious problem in your driveway. One of the issues brought about by flooded waters is the breaking of the ground resulting in huge potholes. therefore, adding a course will ensure that floods won’t affect you in case of heavy rains

Engage a professional service provider.

Hiring a professional is the best thing you can do when it comes to driveway installation. Essentially, the experienced professionals have handled different terrain and gained experience while improving their skillset when it comes to the installation of gravel driveways. Therefore, an expert will handle the different stages of gravel installation professionally. 

Another benefit of having a professional is that they will foresee the problems even before they occur and come up with solutions.  The professionals would have the right equipment. Therefore, you do not have to worry about hiring equipment, which you may not have the skills required to operate.

Conclusion

Are you planning to install a gravel driveway? Follow the steps we have outlined above to ensures the best gravel driveway. At Stratton Landscaping and Tree Removal, we offer professional gravel driveway installation. Contact us today for the best services. 

 

Gravel Driveway Stratton
Gravel Driveway Maintenance Procedures

If you were to take a tour of a majority of households in America, you will notice that gravel is a common material when it comes to the construction of driveways. This is compared to the usage of concrete or asphalt in the construction of driveways. Gravel driveways serve a very important purpose especially when it comes to the cost of driveway construction. To ensure the drive lasts longer, you ought to put into practice various gravel driveway maintenance exercises. Therefore, in this post, we share important gravel driveways maintenance tips.

  1. Watch out for Pot Holes

Over time, the gravel driveways develop potholes. While potholes may be an inevitable problem, you can fix it easily by picking a shovel and even out the gravel, and then tapping it down. However, this is not a permanent approach for fixing gravel driveway potholes. The approach is considered a quick fix, and you need to contact an expert to ensure a permanent solution to gravel driveway potholes.

  1. Rake the Driveway Regularly

Homeowners should get in the habit of raking the gravel driveway often to keep the surface level remove leaves and debris. Over time, leaves from nearby plants will be blown off by the wind, landing on your gravel driveway. Leaves, dust, and debris could be enough to make the driveway look neglected. Besides, the debris that gets lodged between the gravel makes it difficult to drive and walk safely on your driveway. Fortunately, a good quality rake is all you need to expel the debris and leaves off the gravel driveway.

  1. Avoid The Use of Snow Plows

Hiring a snowplowing service may feel luxurious. Unfortunately, you may not feel the same way when you can’t recognize the gravel driveway once the snow melts. However, the snowplow blades push the gravel out from the driveway, and so you will be responsible for putting the gravel back where it is supposed to be. Use of snowplow is only recommended for long gravel driveways. Otherwise, only make use of a shovel or the snowblower.

  1. Hire an Experienced Driveway Contractor

The secret to proper gravel driveway maintenance is engaging an experienced professional. Experienced gravel driveway maintenance experts come with the tools and machinery required for driveway maintenance. This includes the compaction machine to help the gravel to stay in place. Further, the gravel driveway maintenance experts ensure the potholes are filled in the correct way.

Conclusion

Are you planning to install a gravel driveway? For professional installation and gravel driveway maintenance, talk to Stratton Landscaping and Tree Removal. We are gravel driveway maintenance and installation professionals in Virginia.

 

Gravel Services Midlothian and Bon Air

What is Landscape Grading and why it is important 

Landscape grading is known as sculpting or leveling of the land to prepare outdoor spaces for elements like patios, pools, paths, plants, and more. It is the first step of designing ad redesigning your space though it is not the most visible part. It is best done by a professional because if done wrongly, it means the ground will be uneven, thus causing complications when you take another step, causing water drainage to occur. The process requires careful integration of the contours and adds more beauty to the whole place.

Importance of Landscape Grading

Landscape grading ensures a smooth landscape is in place, which provides a level base for other elements. It ensures adequate drainage occurs by the slope of the land away from the construction site. During construction, water drainage is a factor to consider. When carrying out grading without leveling, the water drainage becomes stagnant, thus flows towards the building. It poses a flood threat, which destroys the site by damaging blocks and vegetation around. Conducting a proper grading ensures you get long term drainage, stable base, and protection on topography. A good flow of water creates a healthy environment for your space. Proper landscape grading increases the stability of your land and ensures the reinforcement of aesthetics. It enables construction on the land that previously had a steep slope. Transportation along the area gets easier.

Process of Landscape Grading

It involves designing and construction. The designing step starts with carrying out research. In this, you should partner with a designer with a specialization in a residential designer who will help gather ideas and plan well. While researching, get different opinions, set a budget, try consulting multiple designers, and choose the best.  Choose how you want the lines, color, and texture. After receiving the plan with a proposal of location and materials to use, you start the construction. During construction, you should get the best contractor. Heavy machines like excavators and bulldozers prepare the area, and a grader finalizes the process. Together with the designer, they agree on the specific measures of working on your space. Depending on the project, many companies might get involved, or you can end up finishing the project with just one contractor. 

The things to remember during Landscape Grading

Landscape grading works extensively during a dry season. If conducted during the rainy period, the mud is hard to level; thus, an erosion might occur. Ensure that the land is corrosion free, especially when a rainy season is beginning. Make sure the foundation is distant. The wall cladding should be a little far from landscape grading. If there is water drainage on your lawn, the grading is the problem.  

Conclusion

You can do landscape grading on your own, but it is best to include experts for a perfect outcome. The foundation determines the final set of your space. Always invest well in your light grading process, so has to avoid unnecessary costs of trying to resolve it when it gets damaged. For professional landscape grading in Virginia, contact us today!

 

Gravel Driveway Stratton

 

Installation of gravel driveways is becoming a popular practice in Richmond, VA. To ensure high-quality gravel driveways, you need to hire a professional with enough experience. Hiring a professional ensures the best practices when it comes to the installation of gravel driveways. If you are interested in gravel and grading services in Richmond, VA, you are in good company.

In this post, we share important dos and don’ts when it comes to gravel lot installation. Keep reading to understand the important basics of gravel lot installation.

Spend Time on the Planning and Design Phase

You are eager to dive into the gravel lot installation, to improve your driveways. While this is understandable, you need to ensure proper planning from the onset. Do not allow enthusiasm to get you rushing through the planning and the design phase. After all, you cannot just wake up and start digging to install the driveways. Therefore, involve a professional to assist you in planning. There are several factors to take into consideration. You need to figure out where the driveway will serve you best while considering the drainage. With proper planning, you will give a better idea about how everything will be laid out and where everything will be situated. During the planning phase, ensure the project will not interfere with the underground utilities or the city ordinances. Therefore, spend some extra time in the planning phase and come up with a good layout.

Consider All Your Options

What type of gravel is suitable for your home? While homeowners may think of gravel as standard stones, there are actually multiple types of gravel available for driveways improvement. Therefore, by considering the different varieties, you may find that you enjoy a particular type compared to the others. Therefore, do not just settle on a certain variety without considering the other options.

Be Aware of Depth Requirements

Gravel driveways are not just a matter of the surface layer of the gravel. There are a couple of different layers beneath, and not all of them are suitable. To ensure the driveway is structurally sound, digging should be done adequately and filling with a sub-base and the base layer of stone to ensure firm support. Use large crushed rock and crushed stone smaller than gravel on the surface, to provide perfect support.

Ensure Use of the Right Equipment

Gravel driveways installation requires the usage of the best type of tools and equipment to make sure the driveway is built to last. We advise customers to ensure the use of excavation equipment as it saves your time.  upon completion of the excavation, soil compaction should be done to provide a firm foundation for the gravel lot installation.

Talk to Qualified Professionals

Not just any handyman will do professional gravel way installation. You need to involve a qualified expert with years of experience in the installation of gravel driveways. A local company will charge you standard rates and is always available for consultation.

Are you looking for the best company to install gravel driveways at your home or at your business park? Talk to Stratton Landscaping and Tree Removal for Professional gravel and grading services. We provide a highly skilled team saving you time and money in the long run. at Stratton landscaping, we understand the importance of quality and we are committed to ensuring value for money. Contact us today for a free estimate.

Yard Grading Stratton

Being a homeowner comes with its own set of joys and challenges. Think of the effort you put in the indoors of your home. Everything from the curtains to the crockeries are well thought out and purchased. The same extends to the outdoors as well. In fact, managing and maintaining the outdoors requires a little more technical knowledge and a little extra thought. Things like drainage can make or break your living conditions. With seasons and changes in conditions throughout the year, the need for a well managed drainage is key to avoid any discomfort outside your home. But, what exactly is light grading and why do you need light grading for a better yard? Use this guide to help you understand these concepts so you are better equipped to get the required help if and when needed.

WHAT IS LIGHT GRADING?

Your front yard or backyard might have an incline or uneven surface. Apart from making a garden, utilizing the space with things like a patio requires grading. Light grading is the process of leveling the surface, working on drainage and adding any character to the outdoor space. This makes your outdoor areas aesthetically pleasing and infrastructurally sound to endure seasonal changes. Consequently, it saves the foundations of your house from drainage problems. Plus a well graded yard will encourage you to spend more time outside your house on warm and sunny days.

WHY DO YOU NEED LIGHT GRADING FOR A BETTER YARD?

Now that we know what light grading is, the next reasonable question is why is this necessary. Light grading is important because if left unchecked it can cause some serious damage to your house. If the yard is uneven and sloped towards your home, then it can result in drainage problems. In fact, this can even lead to serious home foundation damages. While spending on light grading upfront might seem like an additional cost. The potential threats of not grading your yard is much higher and things like potential structural damage of the house comes with a heftier sticker price.

HOW DOES LIGHT GRADING HELP WITH DRAINAGE?

Water leaking in the basement can be a nightmare and this is often a result of lack of proper light grading. The light grading process not only levels out the land it also makes sure the drainage slopes are away from the house. Poor drainage results in soil erosion of the areas surrounding the house and if it is left undetected it can even penetrate to the soil beneath the house. Soil erosion can result in serious structural damage. As a result, installing proper drainage manages the flow and this helps your soil from eroding and causing further damage to your home and area.

THE STEPS OF LIGHT GRADING

Light grading is key to avoid soil erosion from lack of proper drainage and to install retention walls in areas prone to erosion.

  • The first step before any work begins is to get a permit. This way you can ensure you can begin work hassle free.That last thing you want is a legal hassle midway through your project. So, make sure you get a permit.
  • The next step is to find out where the utility lines are. For example, where is your gas line? Is the electricity line visible? etcetera. Keep track of gas, electricity, telephone and water lines. Make sure these lines are not disrupted during construction.
  • The next step is to assess the yard. Find out what work it needs and the area of your yard. Measure the length and width of the space and calculate the square footage. This will give you an idea of the space you are dealing with and you can plan what you want to do with the space and where you need to make changes.
  • The next step is to identify drainage areas. Where should you drainage pipes be placed? Be mindful of the drainage requirements based on the area of your yard. The best way to move forward is to consult a professional who can ensure the drainage in your yard is not neglected.
  • Finally, the last step is to dig, level things out, form a downward slope, rake and plant grass. Dig and do the required work so that light grading results in creating the foundations for good drainage and aesthetically pleasing transformation of your yard. Both of which contribute towards protecting and elevating the value of your house.

DECIDING ON THE PROJECT

Light grading can be a DIY project or one that takes on professional assistance. Given that it is a crucial foundation for the longevity of your home, it is best to stick with a light grading professional. A professional will be able to provide a timeline of construction, equipment required and what to expect. This will shed light on all required areas. The list above can act as a guide to help assess the knowledge of the contractor you choose. Light grading is an integral process for a better yard and to extend the life of your home. Understand the terrain of your outdoors and choose a professional accordingly.

The next time you step out for a barbecue or a game of basketball, look around and appreciate the outdoors of your home and be mindful of anything that needs your attention. Invest in your outdoors and enjoy the benefits. Make sure you are aware of the logistics and in touch with a seasoned professional to ensure you make informed decisions. Light grading for a better yard is totally worth it!

References:

https://www.greenmanlanddesign.com/light-grading-drainage-piping-and-erosion-control
https://www.prettypurpledoor.com/yard-grading-how-to-grade-a-yard
https://www.lawnsite.com/threads/what-to-get-for-light-grading.181722
https://thompsonbroslandscaping.com/light-grading
https://www.angieslist.com/articles/how-much-does-yard-leveling-cost.htm
https://woodard247.com/how-to-grade-your-yard-to-prevent-water-damage